A first look at i

ADLINK Technology's i-PI SMARC 1200 is an industrial prototyping kit for AI IoT and Robotics based on a SMARC 2.1 compliant LEC-MTK-I12000 system-on-module (SoM) powered by the MediaTek Genio 1200 (MT8395) octa-core Cortex-A78/A55 AIoT processor with a 4.8 TOPS AI processor.

The company sent me a sample for evaluation and review, and in this first post, I’ll go through an unboxing and how to boot the system with the supported Yocto Linux or Ubuntu.

The i-Pi SMARC 1200 may be destined for industrial users, but it still comes with a neat retail package.

The "i-Pi LEC-MTK-I1200-44-64G/EU" kit features a CPU module with 4GB LPDDR4 memory and 64GB UFS storage.

The package includes the board itself preassembled in a desktop frame, a Quick Start Guide, a 19V/2.37A (45W) power adapter with an EU power cord, a micro USB to USB cable for debugging, and two bits for extra M.2 or mPCIe modules.

The Quick Start Guide has some basic instructions to get started and links to the Wiki and support forums which are full of spam at this time, and may soon need a moderator… The link to the MediaTek NeuroPilot documentation is not working just yet either, but I’m sure it will be fixed in the next few days or weeks.

One of the sides of the board comes with a 3.5mm audio jack, an HDMI 2.0 port capable of outputting up to 4Kp60, two Gigabit Ethernet ports, two USB 3.0 ports, and two USB 2.0 ports.

The opposite side features the DC jack on the right, Power and Reset buttons, a micro USB port, and the board also includes two 40-pin headers for I/Os including one compatible with the 40-pin Raspberry Pi GPIO header.

We can also see those from the top, along with two LVDS connectors and two MIPI CSI camera connectors.

The bottom side of the "i-Pi SMARC Plus" carrier board comes with an M.2 B-Key (PCIe) socket and an M.2 E-Key (PCIe) socket for wireless expansion, as well as a microSD card slot and a SIM card slot.

It's my understanding the devkit ships with a Yocto Desktop image, so I can just connect Ethernet, USB keyboard and mouse, an HDMI display, and the power supply to get started.

It looked good at first with some LEDs being fired up, but I then soon realized nothing would come up on the display, there was no Ethernet link to be found, and my power meter showed 1.5 Watts power consumption only. Pressing the Power and Reset buttons did not help.

So I decided to connect a serial debug board with 921600 bps baudrate as explained in the wiki, but all I got was gibberish:

So it looks like I may have to flash the image manually, and there are instructions for it, but this will take longer than expected, as the Yocto image is a 3.4GB file, we are told to use a Ubuntu 18.04 host only, and to set the boot switch to 1001 on the target device. I suppose the boot switch is the 6-pin header next to the system-on-module, but from the documentation, it's unclear what 1001 means exactly.

So I’ll be talking with ADLink because carrying on with the review. I’d like to thank ADLink for sending the i-Pi SMARC 1200 devkit for review. It was launched just last month in limited quantities, and while it's still listed for $379 on the i-Pi shop, it's currently out of stock.

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies or become a Patron on Patreon

Related posts: